67
HYDRO-FLATION VALVES FOR INNER TUBES
(*) COLD CURE VALVES:
• (*) Thoroughly buff the tube.
• Apply a thin layer of tyre cement for cold cure.
• Never use other products. Never use gas.
• Let dry completely.
• Remove protective film.
• Place the valve on the prepared surface.
• Roll with a knurling wheel to eliminate any trapped air.
• Remove valve core to pierce a hole with
a pointed nail or awl.
For cold vulcanisation, valve S-4047-1,
because of its large diameter,
has real advantages and fits much better
than the standard model.
Rim nut torque:
13 to 15 N.m.
Grease the coupler
washer before mounting.
(V9.14.1)
(V4.03.1)
R-1224-2
TR 218 A
/ hot
S-4015-1
TR 218 A
/ cold (*)
S-4046-2
Hot
S-4047-1
Cold (*)
R-1225-2
R-1225-3
S-4385-1
Polyamide rim nut
Cap for farm
valve hole
S-4011-2
Metal for repair
(V4.02.1)
Hydro-flationnipple O-ring seal
R-1139-2
S-4013-2
P/N suffix: -1 = per unit -2 = per 10 -3 = per 100
1...,57,58,59,60,61,62,63,64,65,66 68,69,70,71,72,73,74,75,76,77,...253