170
Mono-zone flexible heating pads
T. 100 to 120°C with protective film,
for cabinets VSM 150, VSM 200, VSM 204 and VSM 208
Multi-zone flexible heating pad
T. 100 to 120°C with protective film,
for cabinets VSM 208
Protective
screens
COMPONENTS FOR “VSM” VULCANIzERS
IMPORTANT: refer to our “Heating pad operating instructions”.
• Never leave the heating pad unattended during a vulcanization.
• The pad must be powdered with talc on each side before use.. (see talc page 131).
• Handle pads only with the power off (not connected to the cabinet) and with two hands in order to avoid damaging them.
• Never pick up the pads by the electrical connections.
• Store the pads flat. • Properly chock pads during vulcanization.
• These pads are divided into several heating zones in order to provide better thermal regulation.
• The heating temperature is regulated over the entire heating pad surface during the entire vulcanizing period.
The code is affixed to
one corner of the pad.
Screen Dimensions (cm)
65870-67
40 x 28
67418-67
75 x 35
65871-67
60 x 60
67426-67
90 x 90
66797-67
Set of 25 mould release
sheets 20 x 50 cm
Screen Dimensions (cm)
67419-67
77 x 37
67420-67
100 x 60
67421-67
130 x 60
67428-67
110 x 110
67425-67
75 x 75
Pad
Code Dimensions (cm)
Use
Protection
sheet
67382-67
TCR 32 x 21
66551-67
67383-67
T1
56 x 27
66544-67
65865-67
T1A
42 x 33
66545-67
65866-67
T1B 48 x 44
66546-67
67384-67
T8
73 x 35
66550-67
67385-67
T5
86 x 44
66548-67
67386-67
T6
112 x 44
66549-67
67388-67
T2
52 x 49
66546-67
67389-67
T3
66 x 69
66547-67
67390-67
T7
81 x 87
66552-67
Pad
Code Dimensions (cm)
Use
Protection
sheet
66805-67
T22
52 x 49
66546-67
65480-67
T822
73 x 35
66550-67
65479-67
T544
86 x 44
66548-67
65478-67
T644
119 x 44
66549-67
66847-67
T33
54 x 66
66547-67
66848-67
T34
69 x 66
66547-67
66849-67
T76
76 x 90
66552-67
P/N suffix: -67 = per unit
1...,160,161,162,163,164,165,166,167,168,169 171,172,173,174,175,176,177,178,179,180,...253