160
P/N suffix: -67 = per unit
REPAIR SUPPORTS-LIFTS
• Allows the operator to work at a comfortable height without having to bend down or handle the tyre.
• Makes tyre inspection and repair easier.
• Max operating pressure: 7 bar. Use a Filter-Regulator-Lubricator on the compressor outlet.
• We advise you to wear protective goggles, gloves and footwear when using this equipment.
• Follow the user instructions.
This lift must be supported by concrete
with certain regulations.
Please contact us for more information.
This lift must be supported by concrete
with certain regulations.
Please contact us for more information.
HQ
HQ
Machines compliant to the provisions of "Machines" Directive
2006/42/CE and to the corresponding national regulations.
67210-67
67213-67
Maximum tyre size: 36/00 R45 inclusive.
Lifting strength: 3 T.
Maximum lifting capacity: 3000 Kg
Lifting stroke: 700 mm
Dimensions: L. 2300 x W. 1740 x H. 1700 mm.
Necessary working surface area: min. 1 metre around the device.
Maximum pressure: 200 bar.
Interfacing: three-phase 380V plug (not provided).
Tare weight: 500 Kg
Rollers ø 100 mm with useful length 1100 mm.
Maximum tyre size: 59/80 R63.
Lifting strength: 7 T.
Maximum lifting capacity: 7000 Kg
Lifting stroke: 700 mm
Dimensions: L. 2900 x W. 2245 x H. 2200 mm.
Necessary working surface area: min. 1 metre around the device.
Maximum pressure: 200 bar.
Interfacing: three-phase 380V plug (not provided). Tare weight: 1600 Kg
Rollers ø 160 mm with useful length 1300 mm.
7 T. model
- Hydraulic raising/lowering by a jack controlled by a hydraulic unit at 200 bar
with braking system on lowering.
- Rotation of electric rollers with double rotation.
- Safety in the work position due to pin with 5 possible positions.
- The lower part of the tyre is free to enable the straps of a vulcanizer VSM 200
to be passed through it.
- Lighting enabling the operator to work inside the tyre.
- Electric cabinet at rear, including raising/lowering buttons and all electrical safeties
and also the hydraulic unit.
- Hydraulic raising/lowering by a jack controlled by a hydraulic unit at 200 bar
with braking system on lowering.
- Rotation of rollers controlled by a variable speed reducing gear, driving each roller
by means of a chain.
- Right/left rotation with direction selector and adjustable roller rotation speed.
- Operated from a suspended control station with rotating boom, thus leaving
the ground completely clear.
- Safety in the work position due to pin with 6 possible positions.
- The lower part of the tyre is free to enable the straps of a vulcanizer VSM 200
to be passed through it.
- Lighting enabling the operator to work inside the tyre.
- Electric cabinet at rear, including all electrical safeties and also the hydraulic unit.
- Detachable base for transportation.
3 T. model
- Choice of positions at intermediate heights.
- Remote controlled raising/lowering of the cradle and rotation of rollers.
1...,150,151,152,153,154,155,156,157,158,159 161,162,163,164,165,166,167,168,169,170,...253